During the use of automobile, wear and tear and damage of parts are hard to avoid. Mastering effective auto parts repair methods can not only prolong the service life of the car, but also save a lot of expenses for the car owner.
For mechanical parts, such as engines and transmissions, one of the common repair methods is machining. When the parts are worn, deformed, etc., the parts are accurately processed by lathes, milling machines and other equipment to restore their original size and shape. For example, after the inner wall of the cylinder is worn, the boring process can be used to bore the inner wall to the specified size, and then with the corresponding size of the piston ring to ensure the sealing and normal operation of the cylinder. This method can effectively repair parts, but requires specialized equipment and technicians to operate.
Welding is also a commonly used repair method. For some metal parts with cracks, breaks and other problems, welding can connect the damaged parts. For example, if there are cracks in the frame and body of a car, it can be repaired using electric welding or gas shielded welding. When welding, attention should be paid to selecting the appropriate welding rod and welding process to ensure the welding quality and prevent the occurrence of porosity, slag and other defects. At the same time, the parts also need to be properly heat-treated after welding to eliminate welding stress and improve the strength of the parts.
For electrical parts, such as generators and starters, the repair method focuses on circuit detection and component replacement. When the generator does not generate electricity, first check whether the circuit connection is normal, with or without breaks, shorts and so on. If the circuit is normal, the coil, rectifier and other components inside the generator may be damaged, then you need to replace the corresponding components. For the starter motor, check the working condition of the electromagnetic switch, brushes and other components, and replace them in time if they are faulty.
In addition, the repair of automobile parts also needs to pay attention to cleaning and lubrication. In the repair process, it is necessary to keep the parts clean to prevent impurities from entering the interior of the parts and affecting their normal operation. At the same time, when assembling the parts, we should use the appropriate lubricating grease according to the regulations to reduce the friction between the parts and improve the service life of the parts.
Introducing you to the method of repairing automobile parts,you know?.In short, auto parts repair methods are varied, according to the type of parts and damage to choose the appropriate repair method. Only by mastering the correct repair method, can ensure the repair quality of auto parts, so that the car maintains a good running condition.
Leave a Reply